1. Detection alarm

Tuya smart camera usually has the ability of detecting alarm. There are two main types of alarm detection, sound detection and motion detection. When the device detects a sound or object moving, it sends a warning message, and if your App is integrated with push, it will also receive a push notification. Integrate push refer to Integrate push.

The alarm message usually comes with a screenshot of the current video.

Direct-powered doorbell equipment, has ability to provide video messages. When someone rings the doorbell, the device can upload a video message, which is also picked up by an alarm message with a six-second encrypted video.

1.1. Message list

Class

1.1.1. Initialize

Before getting the list of messages, you need to initialize the message manager with the device id and time zone.

Declaration

Initilize message manager.

- (instancetype)initWithDeviceId:(NSString *)devId timeZone:(NSTimeZone *)timeZone;

Parameters

1.1.2. Message calendar

You can use the SDK to look up the date of the alarm message in a certain year and a certain month, so that it can be displayed visually on the calendar.

Declaration

Gets the date on which the message was logged.

- (void)messageDaysForYear:(NSInteger)year
                     month:(NSInteger)month
                   success:(void (^)(NSArray<NSString *> *result))success
                   failure:(void (^)(NSError *error))failure;

Parameters

The result is an array, elements is string. ex: ["01", "11", "30"].

1.1.3. Message type

There are many types of detection alarm messages according to the trigger mode, some of which can be divided into a large category. The SDK provides a list to get the default categories for sorting the query alarm messages.

Declaration

Get the list of message categories.

- (void)getMessageSchemes:(void (^)(NSArray<TuyaSmartCameraMessageSchemeModel *> *result))success
                  failure:(void (^)(NSError *error))failure;

Parameters

TuyaSmartCameraMessageSchemeModel

When getting a list of messages, the value of the msgCodes attribute of the message category can be passed in to get all types of alarm messages that this category contains.

The message type represents the trigger form of the alarm message, which is reflected in the code as the msgCode attribute of the alarm message data model.

Message Type

Depending on the device's capabilities, the types of messages that can be triggered can vary.

1.1.4. Message list

Declaration

Get message list.

- (void)messagesWithMessageCodes:(NSArray *)msgCodes
                          Offset:(NSInteger)offset
                           limit:(NSInteger)limit
                       startTime:(NSInteger)startTime
                         endTime:(NSInteger)endTime
                         success:(void (^)(NSArray<TuyaSmartCameraMessageModel *> *result))success
                         failure:(void (^)(NSError *error))failure;

Parameters

Declaration

Batch delete alarm message.

- (void)removeMessagesWithMessageIds:(NSArray *)msgIds
                             success:(void (^)(void))success
                             failure:(void (^)(NSError *))failure;

Parameters

TuyaSmartCameraMessageModel

Depending on the message type, there may be different attachments. The attachPic property gets the url of the image attachment, and the attachVideos property gets the urls of the video attachments. Normally, this property has only one element.

1.2. Video message

The video attachment in the video message is the encrypted video, which needs to be played through the interface provided by TuyaSmartCloudManager. the string element in attachVideos is component by url + "@" + encrypt key, like "url@key", When playing a video, need to pass in both the video url and the encrypt key.

Declaration

Play video of message.

- (int)playVideoMessageWithUrl:(NSString *)url 
                                       startTime:(int)nStartTime 
                    encryptKey:(NSString *)encryptKey 
                    onResponse:(void (^)(int errCode))callback 
                      onFinish:(void (^)(int errCode))finihedCallBack;

Parameters

Declaration

Pause playing.

- (int)pausePlayVideoMessage;

Declaration

Resume playing.

- (int)resumePlayVideoMessage;

Declaration

Stop playing.

- (int)stopPlayVideoMessage;

Return

The playback of the video message is similar to the playback of the cloud video. When the video frame is received, there will be a video frame data delegate callback.

- (void)cloudManager:(TuyaSmartCloudManager *)cloudManager 
      didReceivedFrame:(CMSampleBufferRef)frameBuffer 
      videoFrameInfo:(TuyaSmartVideoFrameInfo)frameInfo;

The following two attributes in the structure TuyaSmartVideoFrameInfo describe the total length and progress of the video in milliseconds.

• nDuration : video length
• nProgress : progress of current video

The video sound switch, like cloud video, use the following interface:

- (void)enableMute:(BOOL)mute success:(void(^)(void))success failure:(void (^)(NSError * error))failure;

1.2.1. Alarm message and playback

There is no direct correlation between the alarm message and the record videos in memory card, the only correlation is that in the memory card event recording mode, the trigger reason and time point of the alarm message and record video are the same.

The alarm message is saved in the Tuya cloud, and the video recording of the memory card is saved in the camera's memory card, and the video in the memory card may be overwritten when the capacity is insufficient. The switch recorded by the memory card is not related to the switch that detects the alarm, so even in the mode of recording the memory card event, the alarm message and the video recording in the memory card are not one-to-one.

However, if there is a video recording at the time when the alarm message occurs, the SDK does not provide an interface for such correlation search. The developer can establish the correlation by searching whether there is a corresponding video recording in the video clip of the memory card on the same day by the trigger time of the alarm message.

Example

ObjC

- (void)enableDetect {
        if ([self.dpManager isSupportDP:TuyaSmartCameraMotionDetectDPName]) {
        bool motionDetectOn = [[self.dpManager valueForDP:TuyaSmartCameraMotionDetectDPName] tysdk_toBool];
        if (!motionDetectOn) {
            [self.dpManager setValue:@(YES) 
                                                  forDP:TuyaSmartCameraMotionDetectDPName 
                                              success:^(id result) {
                // Enable motion detection successfully
            } failure:^(NSError *error) {
                                // Network error
            }];
        }
          [self.dpManager setValue:TuyaSmartCameraMotionHigh
                              forDP:TuyaSmartCameraMotionSensitivityDPName
                         success:^(id result) {
            // Successfully set the motion detection sensitivity to high sensitivity
        } failure:^(NSError *error) {
            // Network error
        }];
    }
}

- (void)viewDidLoad {
    [super viewDidLoad];
    self.cameraMessage = [[TuyaSmartCameraMessage alloc] initWithDeviceId:self.devId timeZone:[NSTimeZone defaultTimeZone]];
    [self.cameraMessage getMessageSchemes:^(NSArray<TuyaSmartCameraMessageSchemeModel *> *result) {
          // Message category models
        self.schemeModels = result;
                // Get messages of the first category
        [self reloadMessageListWithScheme:result.firstObject];
    } failure:^(NSError *error) {
        // Network error
    }];
}

- (void)reloadMessageListWithScheme:(TuyaSmartCameraMessageSchemeModel *)schemeModel {
    NSDateFormatter *formatter = [NSDateFormatter new];
    formatter.dateFormat = @"yyyy-MM-dd";
    NSDate *date = [formatter dateFromString:@"2020-02-17"];
      // Get the top 20 alarm messages from zero on February 17, 2020 to the present
    [self.cameraMessage messagesWithMessageCodes:schemeModel.msgCodes Offset:0 limit:20 startTime:[date timeIntervalSince1970] endTime:[[NSDate new] timeIntervalSince1970] success:^(NSArray<TuyaSmartCameraMessageModel *> *result) {
        self.messageModelList = result;
    } failure:^(NSError *error) {
        // Network error
    }];
}

Swift

func enableDectect() {
    guard self.dpManager.isSupportDP(.motionDetectDPName) else {
        return;
    }
    if let isMontionDetectOn = self.dpManager.value(forDP: .motionDetectDPName) as? Bool, !isMontionDetectOn {
        self.dpManager.setValue(true, forDP: .motionDetectDPName, success: { _ in
            // Enable motion detection successfully
        }) { _ in
            // Network error
        }
    }
    self.dpManager.setValue(TuyaSmartCameraMotion.high, forDP: .motionSensitivityDPName, success: { _ in
        // Successfully set the motion detection sensitivity to high sensitivity
    }) { _ in
        // Network error
    }
}

override func viewDidLoad() {
    super.viewDidLoad()
    self.cameraMessage = TuyaSmartCameraMessage(deviceId: self.devId, timeZone: NSTimeZone.default)
    self.cameraMessage.getSchemes({ result in
                // Get messages of the first category
        self.schemeModels = result
        if let schemeModel = result?.first {
            reloadMessage(schemeModel: schemeModel)
        }
    }) { _ in
        // Network error
    }
}

func reloadMessage(schemeModel: TuyaSmartCameraMessageSchemeModel) {
    let formatter = DateFormatter()
    formatter.dateFormat = "yyyy-MM-dd"
    let date = formatter.date(from: "2020-02-17")
      // Get the top 20 alarm messages from zero on February 17, 2020 to the present
    self.cameraMessage.messages(withMessageCodes: schemeModel.msgCodes, offset: 0, limit: 20, startTime: Int(date!.timeIntervalSince1970), endTime: Int(Date().timeIntervalSince1970), success: { result in
        self.messageModelList = result;
    }) { _ in
        // Network error
    }
}